SKU 2 HP x1440 RPM, Crompton make, 3 Phase supply, Voltage: 415 V, 50 V
Oil fired burners require an oil pump. The oil pump runs for several seconds at startup (usually on the low-pressure side of the pump) to purge the boiler of any unwanted gases. After a preset period, a solenoid valve opens on the high-pressure side of the pump to allow oil to be fed to the nozzle, which is designed to atomise the oil to the smallest droplets possible where it is mixed with the incoming forced air from the fan. At this point the atomised fuel is ignited, providing the flame inside your burner.